DESCRIPTION
The MudPuppy MP-170-2SC is designed for Waterwell and Geothermal Drilling. You will Never Shovel Sand from this Tank!
The MudPuppy MP-170-2SC Mud Cleaning System 3x4x13 Mud Pump is a perfect set-up for all your waterwell and geothermal drilling needs!
Mud Cleaning System
MudPuppy MP-170-2SC mud cleaning system from Tibban. Powered by Deutz 4-Cylinder Diesel. Â This system can clean up to 350 GPM of drilling mud and includes a 2X3X8.5 Centrifugal Desanding Pump.
Fast Easy Setup
The MudPuppy sets up in just a few minutes. No settling pit to dig and fill. Only 600 Gallons of water needed to get started.
Saves Money
Clean mud means a clean hole. The job site will be Clean and Dry.
Pump, Drill string, and Swivel all last longer with clean mud.
Easily Switch from Air to Mud
Mix only the amount of mud needed to drill the hole.
Additional Items
Also mounted on this gooseneck trailer is a 3X4X13 Centrifugal mud pump powered by a Detroit Diesel. Â This self-contained, skid mounted mud pump includes a separate diesel tank and control system from the mud cleaning system.
Product Specs
MudPuppy MP-170-2SC
Mud Reservoir “Patented”
- 600 Gallons
- 3/16″ HR Steel
- (2) – 4″ Suction Outlets
- Sloped walls & Sand traps
Deutz Diesel 75 TD2011L04i
- Air-Cooled
- 4 cylinder in-line engine
- Fulfills Tier IV EPA emissions regulations
- Electronic Engine Monitor System (Safety shutdown)
- Alternator 12 Volt
Shaker
- 3′ x 5′ Double Screen – Bottom 10 & 100 Top Mesh
- Hydraulic driven w/constant speed control
- Rotary Motion
Mud Mix Hopper
- Jet ventury Mud mix system
Sand Guzzler (Patented)
- 10″ (Centrifugal) Mud Pump
- Can Run Dry Without Damage
- Can take rocks up to 1 – 1/2″ Diameter
- Pump 0 – 3000 RPM
- 0 – 350 GPM
- 20′ of 3″ Hose
Total Weight
- 3,900 Pounds
- Foot Print 5’6″ Wide x 11′ Long x 6’6″ Tall
Fuel Capacity
- 25 Gallons Diesel approximately
- 20 hours “Run time may vary”
Desander System
- 2″x3″x8.5″ 118 (Centrifugal) Mud Pump
- With mechanical or packaged seal
- Desander Manifold Pressure Gauge
- 2-5″ Desander Cones
- 170 GPM
- 15 Micron Cut
Hydraulics System
- Closed Center
- Variable Displacement pump
- Load sense Control
- 55 Gallon Oil Reservoir
- High Capacity Cooling System