DESCRIPTION
The Atlas Copco XRVS 1000+ CD Air Compressor is truly the most versatile in its class with variable flow and pressure settings as a standard feature. Increasing the versatility creates a machine that is ready for a wider range of applications, in turn increasing your return on investment.
USER-FRIENDLY CONTROLS
The intuitive and easy-to-use Xc4003 controller allows for accurate setting of all requirements. The data logging system allows for further optimization creating the highest level of performance. Tracking and recording all parameters for specific application enables analysis of optimal air conditions on the next job. Site optimization allows for fast, safe and cost efficient operation providing advantages against the competition.
MAXIMUM VERSITILITY
The variable pressure and flow of the DrillAirXpert ™ system makes the XRVS 1000+ CD Air Compressor adaptable to a wide range of applications. Any job can now have its flow or pressure requirements dialed in with exact certainty.
EFFICIENT AIR
The Cat 6 cylinder engine is mounted with an Atlas Copco two stage air compressor element, which allows for continual operation at 508psi (35bar). The higher operating pressure can result in 43% faster penetrate rate and up to 15% decrease in fuel consumption (When compared to the same hole at 365psi (25bar).
SIMPLIFIED MAINTENANCE
Servicing through large oversized doors provides quick access to components, including the air end, engine maintenance and electrical components. Drains for water and oil are easy to reach and are plumbed outside of the frame for draining. Atlas Copco extended life filters with 500 hour engine and 1,000 hour compressor service intervals make these compressors a dependable workhorse in your fleet.
DrillAirXpert TM
Atlas Copco’s DrillAirXpert™ regulating system allows the operator the freedom to regulate a specific operating pressure or flow. The unit offers a truly variable pressure system; pressure settings range from 305 to 508 psi, with the flow automatically adjusted by the controller. The flow control function will allow you to call for a specific SCFM, and the machine will regulate the back pressure to maintain that specific flow, allowing greater control of your drill. Eliminating all pneumatic regulating lines not only improves fuel and air efficiency by more than 3%, it also provides trouble-free, coldweather operation.
FEATURES
- No condensate blow off
- Zero regulation lines, no freezing
- Lower fuel consumption
- User data logging
- Variable pressure control (305 – 508 psi)
- SCFM control (pressure varries instead of flow)
- Increased penetration rate (up to 43%)
- Decreased fuel consuption (compared to 350psi – cost per foot drilled)
STANDARD CONFIGURATION
- CAT C13 425hp T4F diesel engine
- Compact, sound attenuated, corrosion resistant enclosure
- Variable pressure and flow capabilities with DrillAirXpert™ extended range are standard (See operating chart in sales leaflet)
- Synthetic compressor oil (ParOil SXtreme), thermostatic bypass valve, 120V 15A engine block heater, and heavy-duty battery.
- Towing package; Road lights (7 flat pin RV plug), Adjustable 3” pintle towing hitch, 17.5” wheels and torsion axle, VIN, adjustable jack stand, electric brakes.
- Atlas Copco XC4003 controller; operational monitoring, diagnostics and safety warning/shutdowns such as high engine temp and low fuel.
- Comes with aftercooler and water separator to remove the moisture out of the compressed air.
OPTIONS
- Refinery equipment
- Support mounted base frame
- Aftercooler w/ Water Separator
- Cold weather package
ISO STANDARDS
Atlas Copco’s fully implemented Quality Management and Environmental Management systems in the design and manufacturing of these units fulfill the requirements of ISO 9001 and ISO 14001. The range has also been tested according to ISO 1217.
ABOUT ATLAS COPCO
Atlas Copco (Copco from Compagnie Pneumatique Commerciale) is a Swedish industrial company that was founded in 1873. It manufactures industrial tools and equipment.
The Atlas Copco Group is a global industrial group of companies headquartered in Nacka, Sweden. In 2017, global revenues totaled SEK 86 billion, and by the end of that year the company employed about 34,012 people. The company manufactures products at about 100 production sites in more than 20 countries. As of 2016, the United States is the company’s largest single market, followed by China. The firm’s shares are listed on the OMX Stockholm exchange and both ‘A’ and ‘B’ classes form part of the benchmark OMXS30 index.
Atlas Copco companies develop, manufacture, service, and rent industrial tools, air compressors (of which it is the world’s leading producer), construction and assembly systems. The Group operates in four areas: Compressor Technique, Vacuum Technique, Construction Technique and Industrial Technique.
For more information and pricing, please request a quote.
