Atlas Copco XAVS 650 JD T4F AIR COMPRESSOR
The Atlas Copco XAVS 650 JD T4F Air Compressor is a single-stage, oil-injected, rotary screw type air compressor, powered by a liquid-cooled, six-cylinder turbocharged diesel engine. The XAVS 650 JD T4F Air Compressor consists of an air end, diesel engine with exhaust treatment, cooling circuit, air/oil separation and control systems – all enclosed within a sound dampened powder coated galvanealed steel enclosure.
A range of undercarriage formats, factory and locally installed options are available.
Special attention has been given to the overall product quality, user friendliness, ease of serviceability, and economical operation to ensure best in class cost of ownership
BENEFITS
- The versatility of the Xc2003 controller gives you the flexibility to tune your machine to a wider range of applications. The machine will match the air flow with the desired operating pressure to maximize output and keep the engine as fuel efficient as possible. In turn it will increase your utilization rate and ROI as it is adaptable to many more applications than a standard machine.
- Standard with 100% fluid containment and Tier 4 Final emissions the compressor is designed for use in all areas of the US and to meet stringent local site environmental concerns.
- Atlas Copco’s FuelXpert™ seamlessly trims engine power under varying load conditions to reduce fuel consumption up to 15%.
- Ensures best in class fuel consumption, reducing operational cost.
- Galvanealed steel enclosure with very large doors for superior access, makes maintenance easy.
- Compact and maneuverable, saving valuable space on your job site, and during transportation.
- Atlas Copco’s PFF system ensures cool, clean and dry air. The PFF system is plumbed through a secondary outlet so you can isolate the hoses and hardware requiring this purity of air. The PFF system comes standard with a three way valve the operator can select various air quality levels and optimal cold weather configuration.
STANDARD CONFIGURATION
- Single stage – 58 to 250 psi – John Deere engine
- 110% Spill free containment, with remote drains
- Cold Climate Package; synthetic compressor oil (ParOil S), thermostatic bypass valve, engine preheater (glow plugs), 120V 1000W engine block heater, heavy-duty battery.
- John Deere 6068 250hp Tier 4 Final engine
- Variable pressure and flow capabilities are standard (see operating chart in sales leaflet)
- XC2003 controller; operational monitoring, diagnostics and safety warning/shutdowns such as high engine temp and low fuel
- DOT towing package; road lights (7 flat pin RV plug), adjustable 3” pintle towing hitch, 17.5” wheels and torsion axle, VIN, adjustable jockey wheel, hydraulic brakes
FEATURES
- Variable operating pressure and flow settings
- Designed with environmental protection in mind
- FuelXpert™
- Compact, sound attenuated, corrosion resistant enclosure
OPTIONAL FEATURES
- Portable Full Feature (filtered air)
COMPRESSOR ELEMENT
The quality of a compressor can be measured through the reliability, efficiency and durability of the compressor element used. Through decades of expertise in the design of compressor elements, the result is the production of most efficient and reliable compressors in the market. When the screw element is efficient durability excels, maintenance intervals decrease and fuel consumption goes down.
The XA(V)S 650-900 JD8 T4F compressor utilizes an Atlas Copco C146 element and is driven from the diesel engine.
Inlet air is filtered through a heavy duty two stage air filter.
AIR/OIL SEPARATOR
Air and oil separation is achieved through a centrifugal oil separator combined with a filter element. Separators are ASME/CRN approved versions and are stamped accordingly.
Designed for a higher maximum working pressure, the separator is equipped with a sealed high pressure safety relief valve, sonic nozzle, automatic blow-down valve, and pressure regulator.
COOLING SYSTEM
The cooling system consists of integrated side-by-side aluminum oil cooler with axial fan to ensure optimum cooling. The fan is protected by a guard for operator safety. There is an access port at the front of the machine for easy cleaning.
The cooling system is suitably designed for continuous operation in ambient conditions up to 122°F, with canopy doors closed.
COMPRESSOR REGULATING SYSTEM
The compressor regulating system consists of two stage air filter, air receiver/oil separator, compressor element, blow down valve, and pressure safety valve.
Economic power consumption is assured by the fully automatic 100% step-less speed regulator that adapts engine speed to air demand.
DISCHARGE OUTLETS
Standard compressed air is available from a 1 ½” NPT ball valve and two ¾” Chicago Fittings. Units with the optional PFF (Portable Full Feature) systems receive a fourth outlet for the filtered air.
JOHN DEERE ENGINE
John Deere 6068HFC08 Tier 4 Final, turbocharged, six-cylinder, liquid-cooled diesel engine provides ample power to operate the compressor continuously at full-load. Meets all US EPA and Environment Canada exhaust legislation with Tier 4 Final compliance. The US EPA engine family is “FJDXL06.8302”. The engine utilizes a Diesel Particulate Filter (DPF) with active regeneration, a Diesel Oxidation Catalyst (DOC) and a Selective Catalytic Reduction (SCR) system to help meet Tier 4 Final emissions. All functionality of the engine and exhaust after treatment are controlled automatically on the XC2003 controller. Engine output at rated speed, in accordance to SAE Standard, is 250hp at 2100 rpm. The engine has the capability to start the compressor to 14°F (-10°C) with standard glow-plug aid. Cold start options are available for up to -14°F (-26°C).
The 88 Gal (333L) fuel tank is sufficiently sized to operate the unit for minimum of 8 hours at full load condition. As well the unit requires Diesel Exhaust Fluid (DEF). There is a DEF tank sufficiently sized to operate the unit for a minimum of 24 hours.
ABOUT ATLAS COPCO
Atlas Copco (Copco from Compagnie Pneumatique Commerciale) is a Swedish industrial company that was founded in 1873. It manufactures industrial tools and equipment.
The Atlas Copco Group is a global industrial group of companies headquartered in Nacka, Sweden. In 2017, global revenues totaled SEK 86 billion, and by the end of that year the company employed about 34,012 people. The company manufactures products at about 100 production sites in more than 20 countries. As of 2016, the United States is the company’s largest single market, followed by China. The firm’s shares are listed on the OMX Stockholm exchange and both ‘A’ and ‘B’ classes form part of the benchmark OMXS30 index.
Atlas Copco companies develop, manufacture, service, and rent industrial tools, air compressors (of which it is the world’s leading producer), construction and assembly systems. The Group operates in four areas: Compressor Technique, Vacuum Technique, Construction Technique and Industrial Technique.
For more information and pricing, please request a quote.
