DESCRIPTION
Three Types of Power … One PTO. Vanair Underdeck PTO V3 125-175CFM
The V3™ Multi-Drive System™ combines Vanair’s patented Genair® system, which consists of a 125 – 185 CFM air compressor and a 6.6 or 9.6 kW weatherproof AC generator with a SAE B pad provision in a single integrated unit. Totally contained underdeck within the truck’s rails, the V3™ replaces the need for separate engine driven air compressors, generators, power inverters, or separate hydraulic pumps. This breakthrough technology provides access to air, ac power and hydraulics through a single PTO opening and is available with the Vanguard™ lifetime warranty on the air end.
Vanair Underdeck PTO V3 125-175CFM
Product Specifications:
AIR COMPRESSOR
Capacity (CFM) 125 160 175
Air (PSI) 100-150 100-150 100-150
Compressor Input (RPM) 1900 2325 2500
Oil Capacity (Gal.) Initial Fill 2.5 2.5 2.5
GENERATOR (TEFC)
Output (continuous) 6.6 kW 9.6 kW
Voltage 120 or 120/240 120 or 120/240
Phase Single Phase Single Phase
Speed 3600 RPM 3600 RPM
Protection Degree IP54 IP54
Type Brushless AVR Brushless AVR
SAE B PUMP PAD (PUMP SOLD SEPARATELY)
Limited to 77 Ft. Lbs.
Product improvement is a continuing goal. Design and specifications are subject to change without notice or obligations.
185 CFM Kit includes additional cooler
Special Features:
Air Compressor
Lifetime Warranty on Air End
100,000 Hours Design Life
100% Duty Cycle
Greater Efficiency for Lower Engine RPMs
Integrated Inlet Valve and Rear Discharge Provides Higher Ground Clearance
Made in the USA
Generator
Totally Enclosed Fan Cooled Sealed Generator
No Brushes for Maintenance-Free Operation
Automatic Voltage Regulation (AVR) Regulates to Within ± 2%
6.6 kW to 9.6 kW Producing 120 or 120/240V at a Constant 60 Hz
Ground Fault Circuits and Outlet Panels Available to Meet Your Needs
Discharge System
Intank Coalescer System Provides Greater Surface Area for Increased Oil Separation
Coalescer is Protected from the Elements, Eliminating the Possibility of Rust or Damage from External Source
Less Prescribed Maintenance and Waste Oil Recovery Costs
Less Than 2 PPM Oil Carryover
Pressure Rated to 250 PSIG
5 Year Warranty or 3000 Hours for Replacement on Coalescer Element Only
Smaller Tank Design Makes Installation Easier
Streamlined Fittings on the End of Tank
ASMA and CRN Certified
THRU-DRIVE™ System
Factory Converted Transfer Case
1310 PTO to Shaft Universal Joint / Coupling
1.25” Precision Ground Shaft with 5 ⁄16” Keys
New Replacement Driveshaft Flange Bolts
Re-usable Crate/Packaging for Core Transfer Case Return
High Speed Bearing
5 Year / 60,000 Mile Warranty
Air Filter
ABS plastic housing
Dual stage
SAE B PAD
Limited to 77 Ft. Lbs.
Cooler(s)
Capable of Cooling Up to 200 CFM at Up to 175 PSI
Air to Oil Heat Exchanger Driven by 12V Fan
Instrumentation
Vanair® VTEC-II® Total Electronic Control System™
Diagnostic Monitoring Display Includes:
Remote Engine Speed Control
Built-In Safety Features
Complete Startup & Shutdown Capabilities
Oil Temperature & Air Pressure System Checks
Troubleshooting & Maintenance Display Assistance & Alerts
LCD
Vanguard™ Rotary Screw Compressor Oil
Full Synthetic Oil Exclusively Created for Rotary Screw Compressors
Flash Point: 257 °C/495 °F
Pour Point: -45 °C /-50 °F
Outstanding Thermal and Oxidative Stability
Reduced Oil Disposal Due to Extended Drain Intervals
Safety Equipment
High-Temperature Shutdown
High-Pressure Shutdown
Air Pressure-Relief Safety Valve
Minimum Pressure Valve
Automatic Blowdown on Shutdown
Oil Fill Plug Safety Relief
UltraLife® 6000 Hour Air/Oil Separator Element
Innovative design offers the lowest cost of ownership in the industry
Six times more life than the nearest competitor’s spin-on coalescer element
15 times more life than an underhood design means the coalescer will last longer than the life cycle of your vehicle
Assured anti-static grounding system
This feature alone can save upwards of $2000.00 per truck in routine maintenance costs, over a 10-year period
FailSafe® Dual Sensory Redundancy System
Patented
Provides backup in case critical sensors fail
Virtually eliminates downtime for increased uptime
Seamlessly switches to back-up sensors without any interruption of the system’s operation
Standard on Xero™ air/oil separator tanks– optional, remote mount waterproof NEMA box
Parts:
Vanguard™ Premium Rotary Screw Oil (Four Pack) 264626-4PACK
Vanguard™ Green Biodegradable Premium Rotary Screw Oil (Four Pack – One Gal.) 264626-4GREEN
Initial 50 Hour Service Kit (Four Gal. of Vanguard™ Oil & Oil Filter) KIT1282
Vanguard™ Lifetime Warranty Service Kit (Four Gal. Vanguard™ Oil, Oil Filter and Air Filter) KIT1057-263931
Oil filter 261991
Air filter element 264266 or 263931
In-Tank coalesce 260017-001 or 272339-004
Temp switch non V-TEC 273786
V-TEC temp thermistor 266844
Pressure switch non V-TEC 262450
V-TEC transducer 267363
Relay 260246
Blowdown valve 270807
Regulator valve 262047
ABOUT VANAIR
From Vanair’s Website:
“Since 1972 Vanair® has worked toward one goal – being the industry leader in Mobile Power Solutions®. During that time, it has been an honor to collaborate with a multitude of companies to engineer products that deliver a true performance edge. Today, from our facilities in Michigan City, Indiana, Vanair® offers the world’s most comprehensive product line of mobile power solutions:
- Vehicle-Mounted Air Compressors
- Generators
- Welders
- Hydraulics
- Electrified Power Equipment®
- Chargers/ Boosters
- Engine Starters
- Custom Mobile Power Equipment
An Innovative Idea in Mobile Power Solutions®
Vanair® began with an idea to do it better. In 1972, Vanair® Manufacturing began as Sullair PTO®, a division of Sullair® Corporation. It was there that a new product and industry were born. The product was the vehicle-mounted 185 CFM underdeck rotary screw air compressor. Its revolutionary design integrated the components of a tow behind rotary screw compressor onto a truck vehicle’s frame and utilized the truck’s engine to drive the compressor via the power takeoff (PTO). This innovative mobile power system eliminated the need for a separate engine driven, tow behind compressor. The advantages quickly impacted the mobile power industry by freeing up the vehicle’s hitch, saving weight, increasing valuable bed space, reducing maintenance and insurance costs, and increasing mobility. That engineering-focus and innovative spirit continues today and has led to multiple Vanair® exclusive Mobile Power Solutions®.
The Future of Mobile Power Solutions®
Vanair® has a straightforward goal– to be your Mobile Power Solutions® provider. We are an engineering-driven company known for our problem-solving capabilities to exceed expectations, drive uptime, and deliver unparalleled performance. Listening to the marketplace, utilizing our experienced team and extensive facilities, finding solutions to your challenges, providing the products that meet your needs – that’s Vanair®.
Where you need it, when you need it, and how you need it – Vanair’s there.”
