DESCRIPTION
The Mud Puppy MP-255-400 sets up in just a few minutes. No settling pit to dig and fill. Only 1000 gallons of water needed to get started. The Mud Puppy MP-255-400 Saves Money, and Clean mud means a clean hole and job site. No large pit needed. Easily Switch from Air to Mud. Pump, Drill string, and Swivel all last longer with clean mud. Mix only the amount of mud needed to drill the hole.
SPECIFICATIONS
- 2013 Mud Puppy MP-255-400
- Up to 500 GPM
- Very Low 131 Hours
- Specs from Tibban MFG Inc.: – Mud Reservoir “Patented”
- 1000 Gallons
- 3/16″ HR Steel
- 2 – 4” Suction Outlets
- Sloped walls & Sand traps
- Never Shovel Sand from this Tank!
- Deutz Diesel 254.6 HP TCD2013L06
- Liquid-Cooled
- 6 Cylinder in-line engine
- Fulfills Tier Ill EPA emissions regulations
- Engine Monitor System (safety shutdown) Gauge Panel
- Alternator 14 Volt
- Shaker Dbl Screen
- 4′ x 5′ Double Screen 10 & 100 Mesh
- Hydraulic driven w/constant speed control
- Rotary Motion
- 1/4″ HR Steel wall construction
- Mud Pump for Down Hole Circulation
- Centerline Triplex Piston Pump
- 450 GPM displacement @ 350 psi with 40 Strokes/minute
- Up to 200 HP
- 12,000 Pounds
- Foot Print 6’6” Wide x 22’ Long x 8’8“ Tall
- Fuel Capacity
- 35 Gallons Diesel approximately 10 Hours
- Desander System Discharge over the Shaker
- 2″x3″x8.5″x 118 (Centrifugal) Mud Pump
- Manifold Pressure Gauge
- 3-5″ Desander Cones Upgradable to 3 Cones
- 255 – 425 GPM
- 15 Micron Minimum Cut
- Sand Guzzler pickup pump (Patented)
- 12″ (Centrifugal) Mud Pump
- Can take rocks up to 1-1/2″ diameter
- Pump 0 – 2500 RPM
- 0 – 500 GPM
- 20′ of 4” Hose Can be extended to 60’
- Hydraulics System
- Closed Center
- Variable Displacement pump
- Load sense Control
- 60 Gallon Oil Reservoir
- High Capacity Oil Cooling System
- Dimensions: 30′ L x 8′ W x 10′ 4″ H and 18,600 lbs in total
- Located in MidWest , USA
- Notes from the manufacture: Great for HDD Drillers
- Fast Easy Setup, On Skids
